Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Model: 23HT22-5503S
Electrical Specification Manufacturer Part Number: 23HT22-5503S Number of phase: 3 Step Angle: 1.2deg Holding Torque: 1Nm(141.64oz.in) Rated Current/phase: 5.5A Phase Resistance: 0.45ohms Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame Size..
A$35.49
Model: 23HT32-5803S-C1
This is a 3-phase stepper motor with a rated current of 5.8A, a holding torque of 1.7Nm(240.79oz.in) and a timing belt pulley. Compared with 2-phase motors, 3-phase motors run more smoothly and reliably. It is widely used in textiles industry, lathe machines, medical equipmen, chemical industry and ..
A$53.23
Model: 24HP39-5004S
Electrical Specification Manufacturer Part Number: 24HP39-5004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 3.5Nm(495.74oz.in) Rated Current/phase: 5.0A Phase Resistance: 0.48ohms± 10% Inductance: 1.85mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification F..
A$72.26
Model: 24HS34-3008D
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
A$53.23
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Hot
Model: 24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$53.23
Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
Hot
Model: 24HS39-3008D
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
A$61.90
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm(566oz.in) 60x60x100mm 4 Wires
Hot
Model: 24HS39-4204D
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. The installation dimensions are the same as the conventional Nema 24 motor, with greater torque. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Elect..
A$63.66
Model: 24HS40-4204S
This is the strongest Nema 24 stepper CNC motor with a step angle of 1.8degrees and a size of 60x60x100mm. It has 4 wires, draws 4.2A per phase and has a holding torque of 4.2Nm(594.77oz.in). Electrical Specification Manufacturer Part Number: 24HS40-4204S Motor Type: Bipolar Stepper Step Angle:..
A$50.10
Model: 3-17HE08-1004S
Package includes: 3 x 17HE08-1004SElectrical Specification Manufacturer Part Number: 17HE08-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 17Ncm(24.07oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.6ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]..
A$19.58
Model: 3-17HE15-1504S
Package includes: 3 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$20.85
3pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HE19-2004S
Package includes: 3 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$28.13
Model: 3-17HE24-2104S
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Package includes: 3 x 17HE24-2104S Electrical Specification Manufacturer Part Number: 17HE24-2104S Motor ..
A$43.06
Model: 3-17HS13-0404S1
This 3pcs bipolar Nema 17 stepper motor is one of the most popular model, it with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Package includes: 3 x 17HS13-0404S1 Electrica..
A$34.53
Model: 3-17HS15-1504S-X1
Package includes: 3 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$38.18
3PCS of Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HS19-2004S1
This is an 3-pack updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC a..
A$40.22
3PCS Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 3-17HS24-2104S
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in). Package includes: 3 x 17HS24-2104S Electrical Specification Manufacturer Part Number: 17HS24-2104S Mo..
A$53.12
Model: 3-23HE22-2804S
Package includes: 3 x 23HE22-2804S Electrical Specification Manufacturer Part Number: 23HE22-2804S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 1.24Nm(175.6oz.in) Rated Current/phase: 2.8A Phase Resistance: 0.9ohms± 10% Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$49.52
Model: 3-23HE30-2804S
Package includes: 3 x 23HE30-2804S Electrical Specification Manufacturer Part Number: 23HE30-2804S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 2.0Nm(283.22oz.in) Rated Current/phase: 2.8A Phase Resistance: 1.17ohms± 10% Inductance: 4.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]..
A$67.63
Model: 3-23HE45-4204S
Package includes: 3 x 23HE45-4204S Electrical Specification Manufacturer Part Number: 23HE45-4204S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.88ohms± 10% Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$106.27
Model: 3-23HS30-2804S
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in). Package includes: 3 x 23HS30-2804S Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type:..
A$79.79
Model: 3-24HS34-3504D
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$129.36
E Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
Hot
Model: 34HE31-6004S
Electrical Specification Manufacturer Part Number: 34HE31-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.42ohms± 10% Inductance: 3.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$44.78
E Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x114mm 4 Wires
Hot
Model: 34HE45-6004S
Electrical Specification Manufacturer Part Number: 34HE45-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 8.2Nm(1161.22oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.51ohms± 10% Inductance: 5.1mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$58.18
E Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Hot
Model: 34HE59-6004S
Electrical Specification Manufacturer Part Number: 34HE59-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 12.0Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.7ohms± 10% Inductance: 7.9mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$76.16
Model: 34HP29-6004S
Electrical Specification Manufacturer Part Number: 34HP29-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 4.5Nm(637.25oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.34ohms± 10% Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$87.78
Model: 34HP38-6004S
Electrical Specification Manufacturer Part Number: 34HP38-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 7.2Nm(1019.81oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.52ohms± 10% Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$107.41
Model: 34HP44-6004S
Electrical Specification Manufacturer Part Number: 34HP44-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 8.2Nm(1161.22oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.55ohms± 10% Inductance: 5.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$119.57
Model: 34HP59-6004S
Electrical Specification Manufacturer Part Number: 34HP59-6004S Number of Phase: 2 Step Angle: 1.8deg Holding Torque: 12Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.72ohms± 10% Inductance: 6.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$153.95
Model: 34HS25-5604S
This stepper motor with a 30mm long shaft and a motor size of 86x86x64mm is the shortest Nema 34 motor we have. It has 4 wires, each phase draws 5.6A, with a holding torque of 3.3Nm(467.32oz.in). Electrical Specification Manufacturer Part Number: 34HS25-5604S Motor Type: Bipolar Stepper S..
A$50.88
Model: 34HS26-2006D
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm(312oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 34HS26-2006D Motor Type: Unip..
A$50.50
Model: 34HS27-4004S
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 85.8x85.8x68mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.4Nm(481.48oz.in). Electrical Specification Manufacturer Part Number: 34HS27-4004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque..
A$50.72
Model: 34HS30-6004S
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x78mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 4.8Nm(679.74oz.in).Electrical Specification Manufacturer Part Number: 34HS30-6004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding T..
A$44.78
Model: 34HS31-5504D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS31-5504D M..
A$51.84
Model: 34HS31-6004S
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 86x86x80mm. It has 4 wires, each phase draws 6.0A, with holding torque 4.8Nm(679.74oz.in).Electrical Specification Manufacturer Part Number: 34HS31-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in)..
A$55.84
Model: 34HS31-6004S1
Electrical Specification Manufacturer Part Number: 34HS31-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.48ohms± 10% Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$60.02
Nema 34 CNC Stepper Motor 7.07Nm(1001oz.in) 86x86x98mm 8 Wires
Hot
Model: 34HS38-3008S
This nema 34 cnc stepper motor with size 86x86x98mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 5Nm(708oz.in) with unipolar connection and 7.07Nm(1001oz.in) with bipolar conne..
A$72.94
Model: 34HS38-4204D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 6.8Nm(962.96oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS38-4204D M..
A$55.02
Model: 34HS39-6004S
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x98mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 8.0Nm(1132.89oz.in). Electrical Specification Manufacturer Part Number: 34HS39-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque..
A$53.15
Model: 34HS45-6004S
This NEMA 34 stepper motor features a 1.8-degree step angle, a holding torque of 8.2Nm(849.84oz.in), and draws 6.0A per phase. It comes equipped with a 37mm keyway shaft and 500mm cables. This motor offers a combination of high torque and low inertia. Built for durability and reliable performance..
A$71.49
Model: 34HS46-5004D1
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 8.5Nm(1204oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS46-5004D1 Mo..
A$52.18
Model: 34HS46-6004S1
Electrical Specification Manufacturer Part Number: 34HS46-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 8.5Nm(1204oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.58ohms± 10% Inductance: 5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$86.10
Model: 34HS59-5004D
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS59-5004D Moto..
A$127.17
Model: 34HS59-5004S
This is the strongest Nema 34 cnc stepper motor, it with size 86x86x150mm. It has 4 wires, each phase draws 5.0A, with holding torque 13Nm(1841oz.in). Electrical Specification Manufacturer Part Number: 34HS59-5004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 13Nm(1841o..
A$115.42
Model: 34HS59-6004S
Electrical Specification Manufacturer Part Number: 34HS59-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 12.0Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.7ohms± 10% Inductance: 7.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$94.98
Model: 34HS61-6004S1
Electrical Specification Manufacturer Part Number: 34HS61-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 13Nm(1841oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.9ohms± 10% Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$117.41
Used - S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Used – 80% New -61 %
Model: 34HS61-6004S1-USED
Electrical Specification Manufacturer Part Number: 34HS61-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 13Nm(1841oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.9ohms± 10% Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$117.41 A$45.81
Model: 42HS59-7004S
This Nema 42 CNC stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 7.0A, with holding torque 22Nm(3115.46oz.in). Electrical Specification Manufacturer Part Number: 42HS59-7004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 22Nm(3115.46oz.in) Rated Curr..
A$181.79
Model: 42HS79-8004D
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 42HS79-8004D Step An..
A$227.23
Model: 42HS79-8004S
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8.0A, allowing for a huge torque up to 30Nm(4248oz.in). Electrical Specification Manufacturer Part Number: 42HS79-8004S Step Angle: 1.8deg Holding Torque: 30Nm(4248oz.in) Rated C..
A$227.23
Model: 42HS79-8004S1
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). It is special for NMRV50 Worm Gearbox.Electrical Specification Manufacturer Part Number: 42HS79-8004S1 Step Angle: 1.8deg Holdi..
A$187.02
Showing 151 to 200 of 215 (5 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments