Model: NMRV50-G7.5-D19
The size of this gearbox is 110mmx110mm and the input shaft diameter is 19mm. This worm gearbox is designed for Nema 42 Stepper Motor or other 110mmx110mm size motor, the output shaft is offset by 90° from the drive shaft. Besides big cases, no gap structure of box means a maintenance-free that is..
A$0.00
Discontinued
Model: iSV2-80TR-48V750A
iSV2-80TR-48V750A integrated servo motor is a 80mm frame size motor integrated with a 17bit incremental magnetic encoder and a servo driver. Compared with ISV57T series servo motor, this motor supports not only pulse control, but also Modbus RTU protocol and RS485 communication.
At very compact siz..
A$0.00
Model: ST-JC15
Shaft: 8.0mm - 10.0mm
P/N: ST-JC15
Diameter: 30mm
Length: 40mm
Sleeve Material: Polyurethane
Body Material: Aluminum Alloy
Due to some reasons, we have temporarily stopped producing and selling this product. This product cannot be ordered. The alternative product is MH2530-8-10 o..
A$0.00
Hot
Model: ST-JC17
Shaft: 8.0mm - 12.7mm
P/N: ST-JC17
Diameter: 30mm
Length: 40mm
Sleeve Material: Polyurethane
Body Material: Aluminum Alloy
..
A$0.00
Hot
Model: ST-JC16
Shaft: 8.0mm - 12.0mm
P/N: ST-JC16
Diameter: 30mm
Length: 40mm
Sleeve Material: Polyurethane
Body Material: Aluminum Alloy
Due to some reasons, we have temporarily stopped producing and selling this product. This product cannot be ordered. The alternative product is MH2530-8-12...
A$0.00
Model: ST-JC18
Shaft: 8.0mm - 14.0mm
P/N: ST-JC18
Diameter: 30mm
Length: 40mm
Sleeve Material: Polyurethane
Body Material: Aluminum Alloy
Due to some reasons, we have temporarily stopped producing and selling this product. This product cannot be ordered. The alternative product is MH3035-8-14...
A$0.00
Model: ST-JC12
Shaft: 8.0mm - 8.0mm
P/N: ST-JC12
Diameter: 20mm
Length: 30mm
Sleeve Material: Polyurethane
Body Material: Aluminum Alloy
This coupling can be replaced by MH2530-8-8 or MH2025-8-8...
A$0.00
Model: 5-A4988
Package includes: 5 x A4988
A4988 is a DMOS microstep driver with converter and overcurrent protection.
Key Features:
This product can operate bipolar stepper motors in full, half, 1/4, 1/8 and 1/16 step modes
Output drive performance up to 35V and 2A
The A4988 includes a fixed off-time c..
A$0.00
Model: AB60-G10-D14
The size of this gearbox is 60 x 60mm and the input shaft diameter is 14mm. This AB series helical planetary gearbox offers a gear ratio of 10:1 with a backlash of 5arcmin. It is designed for servo motors with a size of 60mm and a shaft diameter of 14mm.
This gearbox is designed for harsh environme..
A$0.00
Model: AD90-G10-D19
This helical planetary gearbox offers a gear ratio of 10:1 with a backlash of 3arcmin. It is designed for servo motors with a size of 80mm and an input shaft diameter of 19mm and is supplied with a flange so that your motor can be easily connected directly to the output.
This gearbox is designed fo..
A$0.00
Model: 17E19S1684AB2-330RA
Electrical Specification
Manufacturer Part Number: 17E19S1684AB2-330RA(17E19S1684AB-330RA)
Motor Type: External Linear Stepper
Step Angle: 1.8deg
Holding Torque: 0.44Nm(62.31oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.65ohms
Voltage: 2.8V
Inductance: 2.8mH ± 20%(1KHz)
..
A$0.00
Model: AR2
The Annin Robotics AR2 is an open source low cost robot.
Package includes:
1 x Nema 17 Stepper Motor L=39mm Gear Ratio 20:1 High Precision Planetary Gearbox 17HS15-1684S-HG20
1 x Nema 23 Stepper Motor L=56mm Gear Ratio 50:1 High Precision Planetary Gearbox 23HS22-2804S-HG50
1 x Nema 17..
A$0.00
