Model: 17HS19-2504S-H-V5
This NEMA 17 stepper motor features an 80mm shaft with a 5mm diameter, delivering a precise 1.8° step angle and a high holding torque of 55Ncm(77.93oz-in). With a rated current of 2.5A per phase, it comes with a 1m cables.
Built with Class H insulation, the motor operates reliably in tempera..
A$23.28
Model: 17HS24-2104S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufact..
A$29.41
-33 %
Model: CN-42PM48M01-SG50
Electrical Specification
Manufacturer Part Number: 42PM48M01-SG50
Motor Type: PM Stepper
Phase: 4
Step Angle: 0.15deg
Rated Current/phase: 0.171A
Holding Torque: 98Ncm(138.807oz.in)
Phase Resistance: 70±7%ohms(25℃)Insulation Class: B 130°C[266°F]
Inductance: 54mH±20%
Physical Specifica..
A$27.28 A$18.35
Hot
Model: 23HS30-2804S-H
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree.
Electrical Specification
Manufacturer Part Number: 23HS30-2804S-H
Motor ..
A$50.22
New
Used – 99% New
-5 %
Model: CL57PR-USED
This is a closed-loop stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–5.0A and an operating voltage of 20–50VDC, making it ideal for Nema 17, 23, 24 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combi..
A$87.90 A$83.50
Model: 5-ULN2003
This 5-wire, 4-phase unipolar stepper motor features center-tapped coils with a common power connection. It is ideally paired with the ULN2003 Darlington transistor array driver chip.
The combination offers a direct pluggable interface, enabling simple connection to standard development boards for..
A$6.62
Model: 11HS04-0504S
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5mm. It has 4 wires, each phase draws 0.5A, with holding torque 1Ncm(1.4164oz.in).
Electrical Specification
Manufacturer Part Number: 11HS04-0504S
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Tor..
A$37.07
Hot
Model: 17IP65-06
This P series Nema 17 stepper motor with IP65 waterproof ratings and 0.59Nm(83.57oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted.Electrical Specification
Man..
A$23.94
