What is a Stepper Motor Driver?
Stepper motor driver is an actuator which can transform pulse signal into angular displacement signal, Stepper drivers drive stepper motors to rotate at an angle called step angle in the set direction when receiving a pulse signal. The motor speed is up to the pulse frequency given from the controller, and the displacement is decided on the pulse quantity given from the controller. Stepper system consists of a stepper motor and a stepper driver. Performance of a stepper system is not only up to the motor, but also depends on the stepper driver.
Types of Stepper Motor Driver
STEPPERONLINE offers seven types of stepper motor drivers:
T Series
The T series is a digital stepper driver implemented with advanced stepping control technology, including the DMT series (open loop driver) and CLT series (closed loop driver). It is easy to use and can be used to drive most 2-phase stepper motors smoothly with less heat and noise. All microstepping and output currents are done via DIP switches, making it ideal for applications that require simple stepping and directional control of stepper motors.
Popular models: DM320T, DM332T, DM422T, DM542T, DM556T, DM860T, DM2282T, 3DM2283T, CL42T-V41, CL57T-V41, CL86T-V41.
DMRS Series
DMRS Series are open loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. DMRS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing.
Popular models: DM556RS, DM882RS.
CLRS Series
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save additional controllers in most of point-to-point applications, to greatly enhance system reliability and reduce the cost. CLRS Series also support the feature of teaching, the operation modes of Profile Position, Profile Velocity and Homing.
Popular models: CL57RS, CL86RS.
DMAI Series
The DMAI series has built with a pulser already, you can control two stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction seperately. It was widly used in the application of band carrier.
Popular models: DM456AI, DM480AI.
ISD Series
ISD series is a parallel port control series of miniature high performance stepper motor drivers. Its biggest feature is its small size and strong driving ability. It is integrally designed to fit onto stepper motors. Its high-speed current compensation function can compensate for the effects of back electromotive force when the motor rotates at high speed.
Popular models: ISD02, ISD04, ISD08.
ISC Series
ISC series is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With the ISC series, the motor speed can be controlled by an analog voltage in two optional ways: an external potentiometer or an external voltage. ISC series driver can run the motor without user control device. At the same time, with the high-speed current compensation function, ISC series can compensate the effects caused by counter electromotive force, which is produced in high- speed motor turning.
Popular models: ISC02, ISC04, ISC08.
ST-C Series
The ST-C Series is an advanced control module for single-shaft stepper motors. It features a variety of built-in fixed operation modes, allowing users to quickly set distance, speed, and delay of motions. The controller programming is simple due to clear logic and supports power-off saving.
The module can function independently or integrate seamlessly with other systems and is widely used in general industrial applications.
Popular model: ST-C01.
STEPPERONLINE always offers the best quality stepper motor drivers at the best price. If you have any questions about how to choose a suitable stepper motor driver, please don't hesitate to contact us. We are always here to give you the most suitable recommendation.
Model: Y-USB-CL
Handheld Intelligent Setting Unit for CL57Y & CL86Y...
A$14.38
Model: ST-V3
The device features a driver-free design, powered and controlled via the ST-USB-C USB cable, and is compatible with all versions of Mach3 software and Windows systems. The ST-V3 supports up to 4-axis synchronous motion control and can regulate spindle motors via PWM signals, making it suitable for s..
A$20.77
Model: ST-C02
This compact integrated stepper motor driver and controller is designed for single-axis stepper motors, featuring a wide operating voltage range of 10–30VDC and a broad speed adjustment range. It comes with multiple built-in fixed operation modes and integrates drive and control functions into a c..
A$38.51
Model: ST-C01
This small stepper motor controller is used for single-axis stepper motors. It has an operating voltage range of 5-30VDC, a wide adjustable speed range, and various built-in fixed operating modes.
Users can select from these modes and set distance, speed, delay, and quantity of motion. The control..
A$29.42
Model: ISDT23-45
This is a low noise stepper motor driver that comes with a 1.0-4.5A adjustable peak current and the thickness is only 16.5mm. It can be directly mounted onto NEMA 23 series stepper motors without any flanges. The compact size and low noise make it perfect for places with limited space.
Key Featur..
A$44.32
Model: ISDT17-20
This is an ultra-silent stepper motor driver that is capable of providing a 0.6-2.0A adjustable peak current and the thickness is only 14.5mm. It can be directly mounted onto NEMA 17 series stepper motors without any flanges. The compact size and ulta low noise make it perfect for places with limite..
A$27.09
Hot
Model: ISD08
The ISD08 is a parallel port control series of miniature high performance stepper motor drivers. Its biggest feature is its small size and strong driving ability. Its thickness is less than 14mm. They can be directly mounted onto NEMA 23 series stepper motors with the corresponding flange. ISD08 can..
A$101.06
Hot
Model: ISD04
The ISD04 is a parallel port control series of miniature high performance stepper motor drivers.Its biggest feature is its small size and strong driving ability.Its thickness is less than 14mm.They can be directly mounted onto NEMA 17, 23 series stepper motors with the corresponding flange.ISD04 can..
A$74.70
Hot
Model: ISD02
The ISD02 is a parallel port control series of miniature high performance stepper motor drivers. Its biggest feature is its small size and strong driving ability. Its thickness is less than 14mm. They can be directly mounted onto NEMA 17 series stepper motors with the corresponding flange. ISD02 can..
A$48.34
Model: ISC08
The ISC08 is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With ISC08, the motor speed can be controlled by an analog voltage. It is simple, stable and low cost. ISC08 can provide 3 - 8..
A$105.46
Hot
Model: ISC04
The ISC04 is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With ISC04, the motor speed can be controlled by an analog voltage. It is simple, stable and low cost. ISC04 can provide 0 - 4..
A$74.70
Model: ISC02
The ISC02 is a microprocessor embedded, voltage control, miniature stepper motor controller. It is integrally designed to fit onto stepper motors, and is simple to control. With ISC02, the motor speed can be controlled by an analog voltage. It is simple, stable and low cost. ISC02 can provide 0 - 2..
A$52.74
Model: DM882RS
This is Modbus RS485 stepper driver 2.1-8.2A 18-80VAC or 30-110VDC for Nema 34 stepper motor. DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save ad..
A$157.47
Brand: Leadshine
Model: DM870
The DM870 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA23, 24 and 34 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$97.82
Model: DM860Y
This Y series digital stepper driver 2.4-7.2A AC18V-80V/DC 36V-110V for Nema 34 motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effec..
A$50.50
Model: DM860TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization, making high-quali..
A$47.84
Hot
Model: DM860T
The DM860T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter au..
A$61.98
Model: DM860PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0 - 6.0A and an operating voltage of 24 - 110VDC, making it ideal for Nema 34 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high perfor..
A$91.63
Model: DM860IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0.1–6.0A and an operating voltage of 24–110VDC, making it ideal for Nema 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance at co..
A$74.82
Hot
Model: DM860I
The DM860I is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability that is suitable for Cnc drive . Its motor a..
A$53.55
Model: DM860EC
The DM860EC is a high-performance open-loop driver with 32-bit DSP technology, operating at 20-80VAC/30-110VDC and supporting up to 8.5A current. It features 100Mbps full-duplex EtherCAT communication with CoE(CiA 402) support. The driver offers multiple modes—Cyclic Sync Position, Profile Position,..
A$106.61
Hot
Model: DM556Y
This Y series digital stepper driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$29.92
Model: DM556TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization, making high-quality..
A$28.80
Hot
Model: DM556T
The DM556T is a digital stepper driver with simple design and easy setup. By implementing advanced stepper control technology, this stepper driver is able to power 2-phase and 4 phase stepper motors smoothly with optimal torque and low motor heating & noise. Its operating voltage is 20 - 50VDC..
A$36.67
Hot
Model: DM556RS
This is Modbus RS485 stepper driver 0.1-5.6A 24-48VDC for Nema 17, 23, 24 stepper motor.DMRS Series are stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table(PR Mode) can save additional co..
A$114.53
Model: DM556PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Model: DM556IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–4.0A and an operating voltage of 24–50VDC, making it ideal for Nema 23, 24, 34 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$54.24
Model: DM556EC
The DM556EC is a high-performance open-loop driver with 32-bit DSP technology, operating at 24-50VDC and supporting up to 5.6A current. It features 100Mbps full-duplex EtherCAT communication with CoE (CiA 402) support. The driver offers multiple modes—Cyclic Sync Position, Profile Position, Velocity..
A$84.16
Brand: Leadshine
Model: DM556
The DM556 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA17, 23 and 24 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$85.90
Hot
Model: DM542Y
This Y series digital stepper driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$26.93
Model: DM542TE
The TE Series stepper drivers are upgraded versions based on the T Series, offering exceptional cost-effectiveness. While retaining nearly identical functionality and performance to the T Series, we have significantly reduced the product entry threshold through cost optimization,making high-qualit..
A$26.18
Used – 95% New
-20 %
Model: DM542T-USED
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44 A$25.15
Hot
Model: DM542T
The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$31.44
Brand: Leadshine
Model: DM542
The DM542 stepper drive is designed to power 2 phase(1.8°) or 4-phase(0.9°) NEMA17, 23 and 24 hybrid stepper motors. It can be adopted in many industries(CNC machinery, electronics, medical, automation, packaging…) for applications such as CNC routers, mills, plasma, laser cutters, factory assembly ..
A$73.97
Model: DM480AI
The DM480AI has built with a pulser already, you can control two Max current 8.4A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction sepe..
A$97.82
Model: DM456AI
The DM456AI has built with a pulser already, you can control two Max current 2.8A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction sepe..
A$85.90
Model: DM422T
The DM422T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-co..
A$46.43
Model: DM422IO
This is a stepper driver support I/O (Input/Output) control modes. It delivers superior performance with a current range of 0–2.2A and an operating voltage of 18–36VDC, making it ideal for Nema 11, 14, 17 stepper motors.
This advanced 32-bit DSP-controlled stepper driver delivers high performance ..
A$35.54
Model: DM420Y
This Y series digital stepper driver 0.3-2.2A DC18V-36V for Nema 14, 17, 23 stepper motor is mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly e..
A$21.33
Model: DM420PR
This is a stepper driver support standard Modbus RTU protocol. It delivers superior performance with a current range of 0–2.0A and an operating voltage of 24–50VDC, making it ideal for Nema 11, 14, 17 stepper motors.
The next-generation 32-bit DSP-based closed-loop stepper driver combines high per..
A$74.82
Hot
Model: DM332T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 23 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 3.2A peak current. You can..
A$25.68
Hot
Model: DM320T
This is a digital stepper drive implemented with advanced stepper control technology. It is easy to use and it can be used to drive 2-phase and 4-phase motors(from Nema 8-Nema 17 size) smoothly with less heat and noise. It works with 10 - 30VDC voltage and can provide max 2.2A peak current. You can ..
A$22.00
Model: DM2282T
The DM2282T is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto..
A$233.82
Model: CL86Y-V20
The CL86Y-V20 is an upgraded version of the CL86Y, featuring a 5V/24V logic voltage selector and an RS232 debugging port replacing the USB port. This Y Series closed-loop stepper driver supports 0–8.5A and operates at 20–80VAC / 30–110VDC, designed for Nema 34 stepper motors.
Utilizing next-genera..
A$71.81
Hot
Model: CL86Y
This Y Series closed loop stepper driver 0-8.5A 20-80VAC/30-110VDC for Nema 34 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than t..
A$63.58
Hot
Model: CL86T-V41
This CL86T-V41 closed-loop stepper driver offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 2-phase stepper motor combined with a fully digital, high performance drive..
A$74.10
Model: CL86RS
CLRS Series are closed loop stepper driver based on standard Modbus RS485 protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the open loop stepper system, but also can save ad..
A$200.43
Model: CL86EC
The CL86EC is a high-performance, stability, low noise, and vibration closed-loop driver with 32-bit DSP technology. Supports 20-80VAC/30-110VDC input, adjustable current up to 8.5A. Features isolated EtherCAT bus with COE protocol and four motion control modes (CSP, PP, PV, HOME). Includes multiple..
A$119.70
Model: CL57Y-V20
The CL57Y-V20 is an enhanced version of the CL57Y closed-loop stepper driver, designed to deliver greater versatility and ease of use. Key improvements include a selectable 5V/24V logic voltage selector, an RS232 debugging port (replacing the USB interface), and more stable 3.3V pulse signal recepti..
A$53.63
Hot
Model: CL57Y
This is Y series closed loop stepper driver 0-7.0A 24-50VDC for Nema 17, 23, 24 stepper motor. Using a new generation of 32-bit DSP control technology and power angle, vector control technology, the maximum speed can reach more than 3000rpm.
And the high-speed torque attenuation is much lower than ..
A$48.62
