Menu
Your Cart

Hybrid Stepper Motor

STEPPERONLINE hybrid stepper motor is a combination of variable reluctance and permanent magnet motor. The stator is electromagnetically stimulated like variable reluctance stepper motor, and the rotor of the stepper motor is axially magnetized like permanent magnet stepper motor. This stepper motor is an actuator that converts electrical pulses into angular displacement.

Compared to the other two types of stepper motors, hybrid stepper motors provide higher torque with smaller step angle and have a better dynamic property. With the development of science and technology, especially the development of permanent magnet materials, semiconductor technology and computer technology, these stepper motors have been widely used in industrial automation, robotics, textile and medical industries.

Product Compare0
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
-30 %
Model: CN-16HM17-0304S
CN On Sale - Nema 16 Bipolar 0.9deg 25Ncm(35.4oz.in) 0.3A 39x39x44mm 4 Wires
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x44mm. It has 4 wires, each phase draws 0.3A, with holding torque 25Ncm(35.4oz.in). Electrical Specification Manufacturer Part Number: 16HM17-0304S Motor Type: Bipolar Stepper Step Angle: 0.9deg Holding Torque: 25Ncm(..
A$20.00 A$14.00
Add to Cart
Add to Wish List Compare this Product
AU On Sale - Nema 17 Bipolar Motor 16Ncm(22.66oz.in)
-35 %
Model: AU-17HS08-1004S
AU On Sale - Nema 17 Bipolar Motor 16Ncm(22.66oz.in)
This is the shortest bipolar Nema 17 stepper motor stocked in Australia, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm(22.66oz.in). Works great with various extrders. Electrical Specification Manufacturer Part Numb..
A$16.45 A$10.69
Add to Cart
Add to Wish List Compare this Product
Nema 8 Bipolar 1.8deg 4Ncm(5.7oz.in) 0.6A 20x20x39.3mm 4 Wires
Hot
Model: 8HS15-0604S
Nema 8 Bipolar 1.8deg 4Ncm(5.7oz.in) 0.6A 20x20x39.3mm 4 Wires
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in). Electrical Specification Manufacturer Part Number: 8HS15-0604S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 4Ncm(5.7oz.in)..
A$26.67
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 8 Bipolar 4Ncm(5.7oz.in) 0.6A 20x20x38mm 4 Wires
Hot
Model: 8HS15-0604D
Dual Shaft Nema 8 Bipolar 4Ncm(5.7oz.in) 0.6A 20x20x38mm 4 Wires
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A, with holding torque 4Ncm(5.7oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 8HS15-0604D Motor Type: Bipolar Stepper Step Angle: ..
A$26.67
Add to Cart
Add to Wish List Compare this Product
Nema 8 Bipolar 1.8deg 3Ncm(4.25oz.in) 0.3A 20x20x38mm 4 Wires
Hot
Model: 8HS15-0304S
Nema 8 Bipolar 1.8deg 3Ncm(4.25oz.in) 0.3A 20x20x38mm 4 Wires
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.3A, with holding torque 3Ncm(4.25oz.in). Electrical Specification Manufacturer Part Number: 8HS15-0304S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 3Ncm(4.25oz.in) R..
A$26.67
Add to Cart
Add to Wish List Compare this Product
Nema 8 Bipolar 1.8deg 1.8Ncm(2.55oz.in) 0.6A 20x20x34mm 4 Wires
Hot
Model: 8HS13-0604S
Nema 8 Bipolar 1.8deg 1.8Ncm(2.55oz.in) 0.6A 20x20x34mm 4 Wires
Electrical Specification Manufacturer Part Number: 8HS13-0604S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 1.8Ncm(2.55oz.in) Rated Current/phase: 0.6A Phase Resistance: 5.6ohms Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification ..
A$27.65
Add to Cart
Add to Wish List Compare this Product
Nema 8 Unipolar 1.8deg 1.2Ncm(1.70oz.in) 0.5A 20x20x28mm 6 Wires
Model: 8HS12-0506S
Nema 8 Unipolar 1.8deg 1.2Ncm(1.70oz.in) 0.5A 20x20x28mm 6 Wires
This unipolar nema 8 stepper motor with step angle 1.8deg and size 20x20x30mm. It has 6 wires, each phase draws 0.5A, with holding torque 1.2Ncm(1.70oz.in). Electrical Specification Manufacturer Part Number: 8HS12-0506S Motor Type: Unipolar Stepper Step Angle: 1.8deg Holding Torque: 1.2N..
A$25.57
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 8 Hollow Shaft Stepper Motor Bipolar 1.5Ncm(2.12oz.in) 0.49A 20x20x27mm
Model: 8HS12-0494H
Dual Shaft Nema 8 Hollow Shaft Stepper Motor Bipolar 1.5Ncm(2.12oz.in) 0.49A 20x20x27mm
Electrical Specification Manufacturer Part Number: 8HS12-0494H Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.015Nm(2.12oz.in) Rated Current/phase: 0.49A Phase Resistance: 6.9ohms± 10% Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification..
A$32.88
Add to Cart
Add to Wish List Compare this Product
Nema 8 Bipolar 1.8deg 1.4Ncm(1.98oz.in) 0.2A 20x20x27.3mm 4 Wires
Hot
Model: 8HS11-0204S
Nema 8 Bipolar 1.8deg 1.4Ncm(1.98oz.in) 0.2A 20x20x27.3mm 4 Wires
This mini nema 8 stepper motor is the smallest hybrid motor we carry, it with step angle 1.8deg and size 20x20x28mm. It has 4 wires, each phase draws 0.2A, with holding torque 1.4Ncm(1.98oz.in). Electrical Specification Manufacturer Part Number: 8HS11-0204S Motor Type: Bipolar Stepper Step..
A$25.57
Add to Cart
Add to Wish List Compare this Product
Nema 6 Bipolar 1.8deg 0.58Ncm(0.82oz.in) 0.3A 14x14x30mm 4 Wires
Hot
Model: 6HS12-0304S
Nema 6 Bipolar 1.8deg 0.58Ncm(0.82oz.in) 0.3A 14x14x30mm 4 Wires
Electrical Specification Manufacturer Part Number: 6HS12-0304S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.58Ncm(0.82oz.in) Rated Current/phase: 0.3A Phase Resistance: 22ohms Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$104.22
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 6 Bipolar 1.8deg 0.58Ncm(0.82oz.in) 0.3A 14x14x30mm 4 Wires
Model: 6HS12-0304D
Dual Shaft Nema 6 Bipolar 1.8deg 0.58Ncm(0.82oz.in) 0.3A 14x14x30mm 4 Wires
Electrical Specification Manufacturer Part Number: 6HS12-0304D Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 0.58Ncm(0.82oz.in) Rated Current/phase: 0.3A Phase Resistance: 22ohms Inductance: 4.2mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$104.22
Add to Cart
Add to Wish List Compare this Product
5pcs Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HS19-2004S1
5pcs Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
This 5-pack is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as ..
A$67.04
Add to Cart
Add to Wish List Compare this Product
5pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Model: 5-17HS15-1504S-X1
5pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Package includes: 5 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$63.63
Add to Cart
Add to Wish List Compare this Product
5pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Model: 5-17HE19-2004S
5pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Package includes: 5 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$46.86
Add to Cart
Add to Wish List Compare this Product
5pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 5-17HE15-1504S
5pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Package includes: 5 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$34.74
Add to Cart
Add to Wish List Compare this Product
Nema 42 CNC Stepper Motor Bipolar 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires for NMRV50 Worm Gearbox
Model: 42HS79-8004S1
Nema 42 CNC Stepper Motor Bipolar 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires for NMRV50 Worm Gearbox
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). It is special for NMRV50 Worm Gearbox.Electrical Specification Manufacturer Part Number: 42HS79-8004S1 Step Angle: 1.8deg Holdi..
A$187.02
Add to Cart
Add to Wish List Compare this Product
Nema 42 CNC Stepper Motor Bipolar 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires
Model: 42HS79-8004S
Nema 42 CNC Stepper Motor Bipolar 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8.0A, allowing for a huge torque up to 30Nm(4248oz.in). Electrical Specification Manufacturer Part Number: 42HS79-8004S Step Angle: 1.8deg Holding Torque: 30Nm(4248oz.in) Rated C..
A$227.23
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 42 CNC Stepper Motor 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires
Model: 42HS79-8004D
Dual Shaft Nema 42 CNC Stepper Motor 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 42HS79-8004D Step An..
A$227.23
Add to Cart
Add to Wish List Compare this Product
Nema 42 CNC Stepper Motor Bipolar 22Nm(3115.46oz.in) 7.0A 110x110x150mm 4 Wires
Model: 42HS59-7004S
Nema 42 CNC Stepper Motor Bipolar 22Nm(3115.46oz.in) 7.0A 110x110x150mm 4 Wires
This Nema 42 CNC stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 7.0A, with holding torque 22Nm(3115.46oz.in). Electrical Specification Manufacturer Part Number: 42HS59-7004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 22Nm(3115.46oz.in) Rated Curr..
A$181.79
Add to Cart
Add to Wish List Compare this Product
Used - S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Used – 80% New -61 %
Model: 34HS61-6004S1-USED
Used - S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Electrical Specification Manufacturer Part Number: 34HS61-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 13Nm(1841oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.9ohms± 10% Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$117.41 A$45.81
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Model: 34HS61-6004S1
S Series Nema 34 Stepper Motor 13.0Nm(1841oz.in) 14mm Key-way Shaft 1m Cable
Electrical Specification Manufacturer Part Number: 34HS61-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 13Nm(1841oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.9ohms± 10% Inductance: 7.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$117.41
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Model: 34HS59-6004S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HS59-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 12.0Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.7ohms± 10% Inductance: 7.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$94.98
Add to Cart
Add to Wish List Compare this Product
Nema 34 CNC High Torque Stepper Motor 13Nm(1841oz.in) 5A 86x86x150mm
Model: 34HS59-5004S
Nema 34 CNC High Torque Stepper Motor 13Nm(1841oz.in) 5A 86x86x150mm
This is the strongest Nema 34 cnc stepper motor, it with size 86x86x150mm. It has 4 wires, each phase draws 5.0A, with holding torque 13Nm(1841oz.in). Electrical Specification Manufacturer Part Number: 34HS59-5004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 13Nm(1841o..
A$115.42
Add to Cart
Add to Wish List Compare this Product
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm(1841oz.in) 5A 86x86x150mm
Model: 34HS59-5004D
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm(1841oz.in) 5A 86x86x150mm
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 13Nm(1841oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS59-5004D Moto..
A$127.17
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor 8.5Nm(1204oz.in) 14mm Key-way Shaft 1m Cable
Model: 34HS46-6004S1
S Series Nema 34 Stepper Motor 8.5Nm(1204oz.in) 14mm Key-way Shaft 1m Cable
Electrical Specification Manufacturer Part Number: 34HS46-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 8.5Nm(1204oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.58ohms± 10% Inductance: 5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame S..
A$86.10
Add to Cart
Add to Wish List Compare this Product
Keyway Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm(1204oz.in) 5A 86x86x114mm
Model: 34HS46-5004D1
Keyway Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm(1204oz.in) 5A 86x86x114mm
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 8.5Nm(1204oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS46-5004D1 Mo..
A$52.18
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.45oz.in) 6.0A 86x86x113mm 4 Wires
Model: 34HS45-6004S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.45oz.in) 6.0A 86x86x113mm 4 Wires
This NEMA 34 stepper motor features a 1.8-degree step angle, a holding torque of 8.2Nm(849.84oz.in), and draws 6.0A per phase. It comes equipped with a 37mm keyway shaft and 500mm cables. This motor offers a combination of high torque and low inertia. Built for durability and reliable performance..
A$71.49
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
Model: 34HS39-6004S
S Series Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x98mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 8.0Nm(1132.89oz.in). Electrical Specification Manufacturer Part Number: 34HS39-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque..
A$53.15
Add to Cart
Add to Wish List Compare this Product
Keyway Dual Shaft Nema 34 Stepper Motor 6.8Nm(962.96oz.in) 86x86x98mm 4 Wires
Model: 34HS38-4204D
Keyway Dual Shaft Nema 34 Stepper Motor 6.8Nm(962.96oz.in) 86x86x98mm 4 Wires
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 6.8Nm(962.96oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS38-4204D M..
A$55.02
Add to Cart
Add to Wish List Compare this Product
Nema 34 CNC Stepper Motor 7.07Nm(1001oz.in) 86x86x98mm 8 Wires
Hot
Model: 34HS38-3008S
Nema 34 CNC Stepper Motor 7.07Nm(1001oz.in) 86x86x98mm 8 Wires
This nema 34 cnc stepper motor with size 86x86x98mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 5Nm(708oz.in) with unipolar connection and 7.07Nm(1001oz.in) with bipolar conne..
A$72.94
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor 4.8Nm(679.74oz.in) 14mm Key-way Shaft 1m Cable
Model: 34HS31-6004S1
S Series Nema 34 Stepper Motor 4.8Nm(679.74oz.in) 14mm Key-way Shaft 1m Cable
Electrical Specification Manufacturer Part Number: 34HS31-6004S1 Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.48ohms± 10% Inductance: 3.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$60.02
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
Model: 34HS31-6004S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 86x86x80mm. It has 4 wires, each phase draws 6.0A, with holding torque 4.8Nm(679.74oz.in).Electrical Specification Manufacturer Part Number: 34HS31-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in)..
A$55.84
Add to Cart
Add to Wish List Compare this Product
Keyway Dual Shaft Nema 34 CNC Stepper Motor 4.5Nm(637.25oz.in) 5.5A 86x86x80mm
Model: 34HS31-5504D
Keyway Dual Shaft Nema 34 CNC Stepper Motor 4.5Nm(637.25oz.in) 5.5A 86x86x80mm
This is a dual-shaft motor with a 15mm long rear shaft and holding torque of 4.5Nm(637.25oz.in), and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 34HS31-5504D M..
A$51.84
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
Model: 34HS30-6004S
S Series Nema 34 Stepper Motor 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x78mm 4 Wires
This is a Nema 34 stepper CNC motors with a step angle of 1.8deg and size of 86x86x78mm. It has 4 wires, draws 6.0A per phase and has a holding torque of 4.8Nm(679.74oz.in).Electrical Specification Manufacturer Part Number: 34HS30-6004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding T..
A$44.78
Add to Cart
Add to Wish List Compare this Product
Nema 34 CNC Stepper Motor 3.4Nm(481.48oz.in) 4.0A 85.8x85.8x68mm 4 Wires
Model: 34HS27-4004S
Nema 34 CNC Stepper Motor 3.4Nm(481.48oz.in) 4.0A 85.8x85.8x68mm 4 Wires
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 85.8x85.8x68mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.4Nm(481.48oz.in). Electrical Specification Manufacturer Part Number: 34HS27-4004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque..
A$50.72
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm(312oz.in) 2A 86x86x66mm 6 Wires
Model: 34HS26-2006D
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm(312oz.in) 2A 86x86x66mm 6 Wires
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm(312oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 34HS26-2006D Motor Type: Unip..
A$50.50
Add to Cart
Add to Wish List Compare this Product
S Series Nema 34 Stepper Motor Bipolar 1.8deg 3.3Nm(467.32oz.in) 5.6A 86x86x64mm 4 Wires
Model: 34HS25-5604S
S Series Nema 34 Stepper Motor Bipolar 1.8deg 3.3Nm(467.32oz.in) 5.6A 86x86x64mm 4 Wires
This stepper motor with a 30mm long shaft and a motor size of 86x86x64mm is the shortest Nema 34 motor we have. It has 4 wires, each phase draws 5.6A, with a holding torque of 3.3Nm(467.32oz.in). Electrical Specification Manufacturer Part Number: 34HS25-5604S Motor Type: Bipolar Stepper S..
A$50.88
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 12Nm(1699.34oz.in) 6.0A 86x86x150.6mm 4 Wires
Model: 34HP59-6004S
P Series Nema 34 Bipolar 1.8deg 12Nm(1699.34oz.in) 6.0A 86x86x150.6mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP59-6004S Number of Phase: 2 Step Angle: 1.8deg Holding Torque: 12Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.72ohms± 10% Inductance: 6.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$153.95
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x112.3mm 4 Wires
Model: 34HP44-6004S
P Series Nema 34 Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x112.3mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP44-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 8.2Nm(1161.22oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.55ohms± 10% Inductance: 5.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$119.57
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 7.2Nm(1019.81oz.in) 6.0A 86x86x95.3mm 4 Wires
Model: 34HP38-6004S
P Series Nema 34 Bipolar 1.8deg 7.2Nm(1019.81oz.in) 6.0A 86x86x95.3mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP38-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 7.2Nm(1019.81oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.52ohms± 10% Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$107.41
Add to Cart
Add to Wish List Compare this Product
P Series Nema 34 Bipolar 1.8deg 4.5Nm(637.25oz.in) 6.0A 86x86x74mm 4 Wires
Model: 34HP29-6004S
P Series Nema 34 Bipolar 1.8deg 4.5Nm(637.25oz.in) 6.0A 86x86x74mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HP29-6004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 4.5Nm(637.25oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.34ohms± 10% Inductance: 2.5mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$87.78
Add to Cart
Add to Wish List Compare this Product
E Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Hot
Model: 34HE59-6004S
E Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.34oz.in) 6.0A 86x86x151.5mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HE59-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 12.0Nm(1699.34oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.7ohms± 10% Inductance: 7.9mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$76.16
Add to Cart
Add to Wish List Compare this Product
E Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x114mm 4 Wires
Hot
Model: 34HE45-6004S
E Series Nema 34 Stepper Motor Bipolar 1.8deg 8.2Nm(1161.22oz.in) 6.0A 86x86x114mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HE45-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 8.2Nm(1161.22oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.51ohms± 10% Inductance: 5.1mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fra..
A$58.18
Add to Cart
Add to Wish List Compare this Product
E Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
Hot
Model: 34HE31-6004S
E Series Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires
Electrical Specification Manufacturer Part Number: 34HE31-6004S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 4.8Nm(679.74oz.in) Rated Current/phase: 6.0A Phase Resistance: 0.42ohms± 10% Inductance: 3.8mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Fram..
A$44.78
Add to Cart
Add to Wish List Compare this Product
3pcs Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Model: 3-24HS34-3504D
3pcs Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$129.36
Add to Cart
Add to Wish List Compare this Product
3pcs Nema 23 Bipolar 1.8deg 2.00Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Model: 3-23HS30-2804S
3pcs Nema 23 Bipolar 1.8deg 2.00Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 2.00Nm(283.22oz.in). Package includes: 3 x 23HS30-2804S Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type:..
A$79.79
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 23 Bipolar 1.8deg 3.0Nm(425oz.in) 4.2A 57x57x113mm 4 Wires
Model: 3-23HE45-4204S
3pcs E Series Nema 23 Bipolar 1.8deg 3.0Nm(425oz.in) 4.2A 57x57x113mm 4 Wires
Package includes: 3 x 23HE45-4204S Electrical Specification Manufacturer Part Number: 23HE45-4204S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/phase: 4.2A Phase Resistance: 0.88ohms± 10% Inductance: 3.4mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$106.27
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 23 Bipolar 1.8deg 2.0Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Model: 3-23HE30-2804S
3pcs E Series Nema 23 Bipolar 1.8deg 2.0Nm(283.22oz.in) 2.8A 57x57x76mm 4 Wires
Package includes: 3 x 23HE30-2804S Electrical Specification Manufacturer Part Number: 23HE30-2804S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 2.0Nm(283.22oz.in) Rated Current/phase: 2.8A Phase Resistance: 1.17ohms± 10% Inductance: 4.8mH±20%(1KHz)Insulation Class: B 130°C[266°F]..
A$67.63
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 23 Stepper Motor Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x54mm 4 Wires
Model: 3-23HE22-2804S
3pcs E Series Nema 23 Stepper Motor Bipolar 1.8deg 1.24Nm(175.6oz.in) 2.8A 57x57x54mm 4 Wires
Package includes: 3 x 23HE22-2804S Electrical Specification Manufacturer Part Number: 23HE22-2804S Number of phase: 2 Step Angle: 1.8deg Holding Torque: 1.24Nm(175.6oz.in) Rated Current/phase: 2.8A Phase Resistance: 0.9ohms± 10% Inductance: 2.6mH±20%(1KHz)Insulation Class: B 130°C[266°F] ..
A$49.52
Add to Cart
Add to Wish List Compare this Product
3PCS Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
Hot
Model: 3-17HS24-2104S
3PCS Nema 17 Bipolar 1.8deg 65Ncm(92oz.in) 2.1A 42x42x60mm 4 Wires
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm(92oz.in). Package includes: 3 x 17HS24-2104S Electrical Specification Manufacturer Part Number: 17HS24-2104S Mo..
A$53.12
Add to Cart
Add to Wish List Compare this Product
3PCS of Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HS19-2004S1
3PCS of Nema 17 Bipolar 59Ncm(83.55oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
This is an 3-pack updated version nema 17 stepper motor with holding torque of 59Ncm(83.55oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch(2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC a..
A$40.22
Add to Cart
Add to Wish List Compare this Product
3pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Model: 3-17HS15-1504S-X1
3pcs Nema 17 Bipolar 45Ncm(63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
Package includes: 3 x 17HS15-1504S-X1 Electrical Specification Manufacturer Part Number: 17HS15-1504S-X1 Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 45Ncm(63.74oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.4mH±20%(1KHz)Insulation Class: B 130..
A$38.18
Add to Cart
Add to Wish List Compare this Product
3Pcs Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
Model: 3-17HS13-0404S1
3Pcs Nema 17 Bipolar 1.8deg 26Ncm(36.82oz.in) 0.4A 42x42x34mm 4 Wires
This 3pcs bipolar Nema 17 stepper motor is one of the most popular model, it with step angle 1.8deg and size 42x42x34mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws current 0.4A, with holding torque 26Ncm(36.82oz.in). Package includes: 3 x 17HS13-0404S1 Electrica..
A$34.53
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Stepper Motor 1.8deg 60Ncm(84.97oz.in) 2.1A 42x42x60mm 4 Wires
Model: 3-17HE24-2104S
3pcs E Series Nema 17 Stepper Motor 1.8deg 60Ncm(84.97oz.in) 2.1A 42x42x60mm 4 Wires
This is a economic bipolar Nema 17 stepper motor with a step angle of 1.8deg and size of 42x42x60mm. It has 4 wires, draws 2.1A per phase and has a holding torque of 60Ncm(84.97oz.in). Package includes: 3 x 17HE24-2104S Electrical Specification Manufacturer Part Number: 17HE24-2104S Motor ..
A$43.06
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Hot
Model: 3-17HE19-2004S
3pcs E Series Nema 17 Bipolar 55Ncm(77.88oz.in) 2A 42x42x48mm 4 Wires w/ 1m Cable & Connector
Package includes: 3 x 17HE19-2004S Electrical Specification Manufacturer Part Number: 17HE19-2004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 55Ncm(77.88oz.in) Rated Current/phase: 2.0A Phase Resistance: 1.3ohms Inductance: 2.4mH±20%(1KHz)Insulation Class: B 130°C[266°..
A$28.13
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Model: 3-17HE15-1504S
3pcs E Series Nema 17 Bipolar 42Ncm(59.49oz.in) 1.5A 42x42x38mm 4 Wires w/ 1m Cable & Connector
Package includes: 3 x 17HE15-1504S Electrical Specification Manufacturer Part Number: 17HE15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.3ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[2..
A$20.85
Add to Cart
Add to Wish List Compare this Product
3pcs E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
Model: 3-17HE08-1004S
3pcs E Series Nema 17 Bipolar 1.8deg 17Ncm(24.07oz.in) 1A 42x42x23mm 4 Wires
Package includes: 3 x 17HE08-1004SElectrical Specification Manufacturer Part Number: 17HE08-1004S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 17Ncm(24.07oz.in) Rated Current/phase: 1.0A Phase Resistance: 3.6ohms Inductance: 4.0mH±20%(1KHz)Insulation Class: B 130°C[266°F]..
A$19.58
Add to Cart
Add to Wish List Compare this Product
S Series Nema 24 Bipolar 1.8deg 4.2Nm(594.77oz.in) 4.2A 60x60x100mm 4 Wires
Model: 24HS40-4204S
S Series Nema 24 Bipolar 1.8deg 4.2Nm(594.77oz.in) 4.2A 60x60x100mm 4 Wires
This is the strongest Nema 24 stepper CNC motor with a step angle of 1.8degrees and a size of 60x60x100mm. It has 4 wires, draws 4.2A per phase and has a holding torque of 4.2Nm(594.77oz.in). Electrical Specification Manufacturer Part Number: 24HS40-4204S Motor Type: Bipolar Stepper Step Angle:..
A$50.10
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm(566oz.in) 60x60x100mm 4 Wires
Hot
Model: 24HS39-4204D
Dual Shaft Nema 24 Stepper Motor 4.2A 4Nm(566oz.in) 60x60x100mm 4 Wires
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. The installation dimensions are the same as the conventional Nema 24 motor, with greater torque. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Elect..
A$63.66
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
Hot
Model: 24HS39-3008D
Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires
This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Paralle..
A$61.90
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
Hot
Model: 24HS34-3504D
Dual Shaft Nema 23 Bipolar 3.1Nm(439oz.in) 3.5A 60x60x88mm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm(439oz.in). A rear shaft was made for encoder or equals..
A$53.23
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 CNC Stepper 3.1Nm(439oz.in) 60x60x88mm 8 Wires
Model: 24HS34-3008D
Dual Shaft Nema 23 CNC Stepper 3.1Nm(439oz.in) 60x60x88mm 8 Wires
This nema 23 stepper motor with step angle 1.8deg and size 60x60x88mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type..
A$53.23
Add to Cart
Add to Wish List Compare this Product
P Series Nema 24 Bipolar 1.8deg 3.5Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
Model: 24HP39-5004S
P Series Nema 24 Bipolar 1.8deg 3.5Nm(495.74oz.in) 5.0A 60x60x97.8mm 4 Wires
Electrical Specification Manufacturer Part Number: 24HP39-5004S Number Of Phase: 2 Step Angle: 1.8deg Holding Torque: 3.5Nm(495.74oz.in) Rated Current/phase: 5.0A Phase Resistance: 0.48ohms± 10% Inductance: 1.85mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification F..
A$72.26
Add to Cart
Add to Wish List Compare this Product
Nema 23 3-Phase Stepper Motor 1.7Nm(240.79oz.in) 5.8A 57x57x80.7mm 3 Wires w/ Timing Belt Pulley
Model: 23HT32-5803S-C1
Nema 23 3-Phase Stepper Motor 1.7Nm(240.79oz.in) 5.8A 57x57x80.7mm 3 Wires w/ Timing Belt Pulley
This is a 3-phase stepper motor with a rated current of 5.8A, a holding torque of 1.7Nm(240.79oz.in) and a timing belt pulley. Compared with 2-phase motors, 3-phase motors run more smoothly and reliably. It is widely used in textiles industry, lathe machines, medical equipmen, chemical industry and ..
A$53.23
Add to Cart
Add to Wish List Compare this Product
P Series Nema 23 1.2deg 3-phase Stepper Motor 5.5A 1Nm(141.64oz.in)
Model: 23HT22-5503S
P Series Nema 23 1.2deg 3-phase Stepper Motor 5.5A 1Nm(141.64oz.in)
Electrical Specification Manufacturer Part Number: 23HT22-5503S Number of phase: 3 Step Angle: 1.2deg Holding Torque: 1Nm(141.64oz.in) Rated Current/phase: 5.5A Phase Resistance: 0.45ohms Inductance: 0.98mH±20%(1KHz)Insulation Class: B 130°C[266°F] Physical Specification Frame Size..
A$35.49
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 3Nm(425oz.in) 8mm Diameter 4.2A 57x57x113mm 4 Wires Stepper Motor
Model: 23HS45-4204S1
Nema 23 Bipolar 3Nm(425oz.in) 8mm Diameter 4.2A 57x57x113mm 4 Wires Stepper Motor
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).Different from standard 10mm shaft diameter, the shaft dimater of this motor is 8mm. Electrical Specification Manufactur..
A$45.92
Add to Cart
Add to Wish List Compare this Product
Used - Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
Used – 90% New -60 %
Model: 23HS45-4204S-USED
Used - Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).  Electrical Specification Manufacturer Part Number: 23HS45-4204S Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$45.92 A$18.40
Add to Cart
Add to Wish List Compare this Product
Nema 23 Stepper Motor 3Nm(425oz.in) with 9mm Shaft for NmRV30 Worm Gear Speed Reducer
Model: 23HS45-4204S-RV
Nema 23 Stepper Motor 3Nm(425oz.in) with 9mm Shaft for NmRV30 Worm Gear Speed Reducer
This motor has a torque of 3.0Nm(425oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly. Electrical Specification Manufacturer Part Number: 23HS45-4204S-RV Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 3.0Nm(425oz.in) Rated Current/pha..
A$57.33
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
Hot
Model: 23HS45-4204S
Nema 23 Bipolar 3Nm(425oz.in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC
This is the strongest Nema 23 stepper cnc motors, it with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm(425oz.in).  Electrical Specification Manufacturer Part Number: 23HS45-4204S Motor Type: Bipolar Stepper Step Angle: 1.8deg ..
A$45.92
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 Bipolar 2.8Nm(396.51oz.in) 4.2A 57x57x113mm 4 Wires
Hot
Model: 23HS45-4204D
Dual Shaft Nema 23 Bipolar 2.8Nm(396.51oz.in) 4.2A 57x57x113mm 4 Wires
This is a dual-shaft motor with a 13.5mm long rear shaft and holding torque of 2.8Nm(396.51oz.in) , and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.Electrical Specification Manufacturer Part Number: 23HS45-4204D ..
A$60.59
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 3Nm(425oz.in) 3.5A 57x57x113mm 4 Wires CNC Stepper Motor
Hot
Model: 23HS45-3504S
Nema 23 Bipolar 3Nm(425oz.in) 3.5A 57x57x113mm 4 Wires CNC Stepper Motor
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x113mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.0Nm(425oz.in). Electrical Specification Manufacturer Part Number: 23HS45-3504S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 3.0Nm(4..
A$49.57
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 1.8deg 2.4Nm(339.87oz.in) 1.8A 57x57x102mm 4 Wires
Hot
Model: 23HS41-1804S
Nema 23 Bipolar 1.8deg 2.4Nm(339.87oz.in) 1.8A 57x57x102mm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x102mm. It has 4 wires, each phase draws 1.8A, with holding torque 2.4Nm(339.87oz.in). Electrical Specification Manufacturer Part Number: 23HS41-1804S Motor Type: Bipolar Stepper Step Angle: 1.8deg Holding Torque: 2.4N..
A$40.29
Add to Cart
Add to Wish List Compare this Product
Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
Hot
Model: 23HS39-5004S
Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
The NEMA 23 stepper motor has a rated current of 5.0A and a holding torque of 3.0Nm(424.83oz.in). With a step angle of 1.8 degrees and dimensions of 57x57x100mm, this 4-wire motor is ideal for precise positioning in various automation applications, offering reliable performance and robust torque out..
A$23.41
Add to Cart
Add to Wish List Compare this Product
Nema 23 Bipolar 1.8deg 2.83Nm(400oz.in) 4A 57x57x84mm 8 Wires
Hot
Model: 23HS33-4008S
Nema 23 Bipolar 1.8deg 2.83Nm(400oz.in) 4A 57x57x84mm 8 Wires
This nema 23 stepper motor with step angle 1.8deg, a cable length of 500mm and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 2.0Nm(283oz.in) with unipolar co..
A$45.14
Add to Cart
Add to Wish List Compare this Product
Dual Shaft Nema 23 Uni/Bipolar 1.8deg 2.83Nm(400oz.in) 4A 57x57x84mm 8 Wires
Hot
Model: 23HS33-4008D
Dual Shaft Nema 23 Uni/Bipolar 1.8deg 2.83Nm(400oz.in) 4A 57x57x84mm 8 Wires
This nema 23 stepper motor with step angle 1.8deg, a holding torque(bipolar) of 2.83Nm(400oz.in), a holding torque(unipolar) of 2.0Nm(283oz.in) and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you w..
A$42.85
Add to Cart
Add to Wish List Compare this Product
Showing 1 to 75 of 215 (3 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments