T6/A6/DSY
Model: Gearbox
Since our planetary gearboxes' part numbers have conflicts with other company's already registered trademark "PLE" that might cause confusion about the source, we finally decided to rename our planetary gearboxes.
The effected model including:
NO
Old Model
New Model
..
A$0.00
Model: SS-14
This shaft sleeve is designed for EG34 series planetary gearbox.
Physical Specifications
Input Shaft Inner Diameter: 19mm
Shaft Sleeve Convert: 19mm to 14mm
..
A$4.54
Model: SS-13
This shaft sleeve is designed for EG34 series planetary gearbox with 19mm input shaft diameter.
Physical Specifications
Input Shaft Inner Diameter: 19mm
Shaft Sleeve Convert: 19mm to 12.7mm(1/2inch)Currently, STEPPERONLINE has 4 gearboxes with 12.7mm input shaft diameter for your choice. EG3..
A$4.75
Hot
Model: RV30-AS
This is single output shaft for NMRV30 Worm Gear Speed Reducer, the output shaft diameter is 14mm with 5mm keyway and M6 screw holes on the end.
Specifications
Manufacturer Part Number: R30-AS
Single/Double Shaft: Single Shaft
Output Shaft Type: Key way
Output Shaft Diameter: Φ14mm
Outpu..
A$4.82
Hot
Model: RV30-K11-D8
This shaft sleeve is designed for NMRV30 worm gearbox. The original input shaft inner diameter is 11mm, this shaft sleeve convert 11mm to 8mm...
A$5.52
Model: RV30-AB
This is double output shaft for NMRV30 Worm Gear Speed Reducer, the output shaft diameter is 14mm with 5mm keyway and M6 screw holes on both ends.
Specifications
Manufacturer Part Number: RV30-AB
Single/Double Shaft: Double Shaft
Output Shaft Type: Key Way
Output Shaft Diameter: Φ14mm
Ou..
A$5.78
Hot
Model: RV40-AS
This is single output shaft for NMRV40 Worm Gear Speed Reducer, the output shaft diameter is 18mm with 6mm keyway and M6 screw holes on the end.
Specifications
Manufacturer Part Number: RV40-AS
Single/Double Shaft: Single Shaft
Output Shaft Type: Key way
Output Shaft Diameter: Φ18mm
Outp..
A$6.26
Model: RV50-AS
This is single output shaft for NMRV50 Worm Gear Speed Reducer, the output shaft diameter is 25mm with 5mm keyway and M10 screw holes on the end.
Specifications
Manufacturer Part Number: RV50-AS
Single/Double Shaft: Single Shaft
Output Shaft Type: Key way
Output Shaft Diameter: Φ25mm
Out..
A$7.23
Model: RV40-AB
This is double output shaft for NMRV40 Worm Gear Speed Reducer, the output shaft diameter is 18mm with 6mm keyway and M6 screw holes on both ends.
Specifications
Manufacturer Part Number: RV40-AB
Single/Double Shaft: Double Shaft
Output Shaft Type: Key Way
Output Shaft Diameter: Φ18mm
Ou..
A$7.71
Model: RV30-TA
NMRV30 series worm gearbox torque arm kit.
This is the torque arm mounting bracket for our NMRV30 series worm gearbox. Includes the bracket with a vibration isolating bushing and mounting hardware...
A$7.86
Model: RV40-TA
NMRV40 series worm gearbox torque arm kit.
This is the torque arm mounting bracket for our NMRV40 series worm gearbox. Includes the bracket with a vibration isolating bushing and mounting hardware...
A$9.15
Model: RV50-AB
This is double output shaft for NMRV50 Worm Gear Speed Reducer, the output shaft diameter is 25mm with 8mm keyway and M10 screw holes on both ends.
Specifications
Manufacturer Part Number: RV50-AB
Single/Double Shaft: Double Shaft
Output Shaft Type: Key Way
Output Shaft Diameter: Φ25mm
O..
A$11.02
Model: RV50-TA
NMRV50 series worm gearbox torque arm kit.
This is the torque arm mounting bracket for our NMRV50 series worm gearbox. Includes the bracket with a vibration isolating bushing and mounting hardware...
A$13.09
Used – 80% New
-32 %
Model: MG23-G10-D8-USED
This high-precision planetary gearbox is belong to MG series gearbox, it with gear ratio 10:1 and a maximum 30arc-min backlash. Different with the EG series' steel gears, MG series' gears are made of powder metallurgy. It's an excellent choice for applications that require good accuracy but low cost..
A$30.70 A$20.77
Hot
Model: MG17-G10
This high-precision planetary gearbox is belong to MG series gearbox, it with gear ratio 10:1 and a maximum 30arc-min backlash. Diffent with the EG series' steel gears, MG series' gears are made of powder metallurgy. It's an excellent choice for applications that require good accuracy but low cost. ..
A$21.68
Hot
Model: MG17-G5
This high-precision planetary gearbox is belong to MG series gearbox, it with gear ratio 5:1 and a maximum 30arc-min backlash. Diffent with the EG series' steel gears, MG series' gears are made of powder metallurgy. It's an excellent choice for applications that require good accuracy but low cost.
..
A$21.68
Model: MGL17-G10
The MGL series high-precision planetary gearboxes of the MGL series offers a gear ratio of 10:1 and a maximum backlash of 30arc-min. In contrast to the MG series, the MGL series is specially designed to support standard Nema 17 motors with standard shafts and therefore offers greater flexibility in ..
A$22.00
Model: MGL17-G4
The MGL series high-precision planetary gearboxes of the MGL series offers a gear ratio of 4:1 and a maximum backlash of 30arc-min. In contrast to the MG series, the MGL series is specially designed to support standard Nema 17 motors with standard shafts and therefore offers greater flexibility in t..
A$22.00
Model: MGL17-G5
The MGL series high-precision planetary gearboxes of the MGL series offers a gear ratio of 5:1 and a maximum backlash of 30arc-min. In contrast to the MG series, the MGL series is specially designed to support standard Nema 17 motors with standard shafts and therefore offers greater flexibility in t..
A$22.00
Model: MG17-G100
This high-precision planetary gearbox is belong to MG series gearbox, it with gear ratio 100:1 and a maximum 45arc-min backlash. Diffent with the EG series' steel gears, MG series' gears are made of powder metallurgy. It's an excellent choice for applications that require good accuracy but low cost...
A$28.90
Model: MG17-G20
The size of this gearbox is 42 x 42mm and the input shaft diameter is 5mm. This high-precision planetary gearbox is belong to MG series gearbox, it with gear ratio 20:1 and a maximum 45arc-min backlash. Diffent with the EG series' steel gears, MG series' gears are made of powder metallurgy. It's an ..
A$28.90
Model: MG17-G50
The size of this gearbox is 42 x 42mm and the input shaft diameter is 5mm. This high-precision planetary gearbox is belong to MG series gearbox, it with gear ratio 50:1 and a maximum 45arc-min backlash. Diffent with the EG series' steel gears, MG series' gears are made of powder metallurgy. It's an ..
A$28.90
Model: MGL17-G100
The MGL series high-precision planetary gearboxes of the MGL series offers a gear ratio of 100:1 and a maximum backlash of 45arc-min. In contrast to the MG series, the MGL series is specially designed to support standard Nema 17 motors with standard shafts and therefore offers greater flexibility in..
A$28.99
Model: MGL17-G20
The MGL series high-precision planetary gearboxes of the MGL series offers a gear ratio of 20:1 and a maximum backlash of 45arc-min. In contrast to the MG series, the MGL series is specially designed to support standard Nema 17 motors with standard shafts and therefore offers greater flexibility in ..
A$28.99
Model: MGL17-G25
The MGL series high-precision planetary gearboxes of the MGL series offers a gear ratio of 25:1 and a maximum backlash of 45arc-min. In contrast to the MG series, the MGL series is specially designed to support standard Nema 17 motors with standard shafts and therefore offers greater flexibility in ..
A$28.99
